Pair the Pryme BT-PTT-Z Mini with iOS devices
Turn Bluetooth on Within iOS Device Settings
To pair the Pryme BT-PTT-Z Mini with your iOS device, go to your iOS device settings (Settings > Bluetooth) and make sure Bluetooth is switched on.
Prepare the Pryme BT-PTT-Z Mini
Make sure the Pryme button is turned on and within 30 feet of the phone.
To turn on the Pryme button, unscrew the cap, and with the tip of a pen, move the switch to the ON position as shown below.
Pair the Pryme BT-PTT-Z Mini Within ESChat
From the ESChat app, open the settings menu within ESChat. Select the three dot menu and then select “Settings.”
| Open the PTT Button menu, which should have None as the default selection. Select Bluetooth LE to begin the pairing process. |
|
Once the pairing process is complete, the device will appear as connected.
Go back to the settings menu and see the PTT-Z listed as the paired PTT Button. |
About Default Callee and PTT Button
Depending on the specific work environment, a Default Callee selection may make calls more efficient. However, a Default Callee is not strictly necessary.