Pair the Pryme BT-PTT-Z Mini with iOS devices

Turn Bluetooth on Within iOS Device Settings

To pair the Pryme BT-PTT-Z Mini with your iOS device, go to your iOS device settings (Settings > Bluetooth) and make sure Bluetooth is switched on.

Prepare the Pryme BT-PTT-Z Mini 

Make sure the Pryme button you want to pair is turned on and within 30 feet of your phone.

To turn on the Pryme button, unscrew the cap, and with the tip of a pen, move the switch to the ON position as shown below.

Pair the Pryme BT-PTT-Z Mini within ESChat

From the ESChat app, open the settings menu within ESChat. Select the three dot menu and then select “Settings.” 

Open the PTT Button menu, which should have None as the default selection.  Select Bluetooth LE to begin the pairing process.

Once the pairing process is complete, the device will appear as connected.     Go back to the settings menu and see the PTT-Z  listed as the paired PTT Button.

About Default Callee and PTT Button

Depending on the specific work environment, a Default Callee selection may make calls more efficient. However, it is not necessary.